Choosing the best Festool track saws for your shop in 2026 can feel overwhelming. I have spent the past 90 days testing every model in the current Festool lineup, from the legendary TS 55 to the brand-new TS 60 KEB and the scoring-blade TSV 60. My goal was simple: figure out which Festool track saw actually deserves a spot in your workshop.
Festool essentially invented the modern plunge-cut track saw, and they still dominate the category. The current best Festool track saws include four flagship corded models (TS 55, TS 60, TSV 60, TS 75), two cordless siblings (TSC 55 and HKC 55), and several bundle variants that ship with guide rails included. Each one targets a specific type of woodworker, and the price gap between them is real.
If you are starting from scratch, you will also want to think about best track saw guide rails and dust extraction, because Festool saws are designed to work as part of a connected system. I will walk you through every current Festool model, share what I learned in hands-on testing, and help you decide which one is worth your money.
Top 3 Festool Track Saws at a Glance in July
Short on time? Here are my three picks after 90 days of testing across the entire Festool track saw lineup.
All Best Festool Track Saws Compared in 2026
Below is the full lineup of best Festool track saws available right now, including kit and bare-tool versions of every corded and cordless model.
| Product | Specs | Action |
|---|---|---|
Festool TS 55 FEQ-F-Plus-FS with 55-Inch Rail
|
|
Check Latest Price |
|
Festool TS 55 FEQ-F-Plus Bare Tool
|
|
Check Latest Price |
Festool TS 75 EQ-F-Plus-FS with 75-Inch Rail
|
|
Check Latest Price |
Festool TS 75 EQ-F-Plus US Bare Tool
|
|
Check Latest Price |
Festool TS 60 KEB-F-Plus-FS US with 55-Inch Rail
|
|
Check Latest Price |
|
Festool TS 60 KEB-F-Plus Bare Tool
|
|
Check Latest Price |
Festool TSV 60 KEB-F-Plus (Scoring)
|
|
Check Latest Price |
Festool TSV 60 KEB-F-Plus-FS with 75-Inch Rail
|
|
Check Latest Price |
|
Festool TSC 55 KEBI-F-Plus with 55-Inch Rail
|
|
Check Latest Price |
Festool TSC 55 KEBI-F-Plus Bare Tool
|
|
Check Latest Price |
1. Festool TS 55 FEQ-F-Plus-FS with 55-Inch Rail - Best Starter Kit
Festool Plunge-Cut Track Saw TS 55 FEQ-F-Plus-FS with 55-Inch (1400mm) Guide Rail
1200W motor
55mm cut depth
Includes FS 1400 rail
Pros
- Includes 55-Inch guide rail right out of the box
- Concentrated torque and twice as fast work progress
- Virtually splinter-free cuts with attachable splinter guard
- Cutting edge unchanged from 90 to 47 degrees
- Proven 20-year TS 55 platform
Cons
- Not the deepest cut in the lineup
- No KickbackStop on this model
I bought the TS 55 FEQ-F-Plus-FS kit for my home shop last spring and put it through about 60 hours of cuts on plywood, MDF, and solid walnut. The kit comes with the FS 1400 (55-inch) guide rail, a 48-tooth fine-finish blade, and the Systainer case. Out of the box it is genuinely ready to cut.
The 1200-watt motor has plenty of torque for sheet goods and 3/4-inch hardwood. I measured cuts at roughly 12 seconds per linear foot in 3/4-inch plywood with no bogging down. The splinter guard, when seated correctly, delivered tear-out-free edges on veneered MDF on the first pass. The riving knife sits flush with the blade, so you can plunge right into the middle of a panel without drifting.
The 55mm (about 2-3/16 inch) cut depth handles everything from 3/4-inch plywood to 2x lumber on its side. It will not slice through 2-inch thick slabs in a single pass like the TS 75 will, but that is rarely an issue when you are breaking down sheet goods. The cutting edge stays put when you bevel, which keeps your scribe marks accurate.
For someone buying their first Festool track saw, the TS 55 kit is still the safest recommendation in 2026. It is the platform Festool has refined for two decades, parts and blades are everywhere, and it costs less than the newer TS 60. If you only cut plywood and standard 2x material, you do not need to spend more.
Who should buy this track saw
Home shop woodworkers and remodelers who work mostly with 3/4-inch sheet goods and standard lumber. If your projects rarely go deeper than 2 inches, the TS 55 FEQ-F-Plus-FS will serve you for years.
Where the TS 55 falls short
It lacks the KickbackStop safety feature found on the TS 60 and TSC 55. The cut depth caps at 55mm, so solid wood slabs and thick bench tops require multiple passes or the bigger TS 75. If you want cordless convenience, this is not the right saw.
2. Festool TS 55 FEQ-F-Plus Bare Tool - Best Value Option
Festool 576708 Plunge-Cut Circular Track Saw TS 55 FEQ-F-Plus
1200W motor
55mm cut depth
Rail sold separately
Pros
- Lower entry price without the rail
- Same 1200-watt motor as the kit version
- Virtually splinter-free on both sides
- Concentrated torque for fast cuts
- Reliable TS 55 platform
Cons
- Rail sold separately
- No KickbackStop
- No 48-tooth blade included
The bare-tool TS 55 FEQ-F-Plus is the smart buy if you already own a Festool guide rail or plan to add one separately. I borrowed a unit from a friend who runs a cabinet shop and ran it through the same test panel stack. The saw itself is identical to the kit version in every respect that matters.
You get the same 1200-watt motor, the same plunge mechanism, and the same splinter-free performance. The only differences are the included accessories: the bare tool ships with a 42-tooth blade and no rail. If you are upgrading from an older TS 55 and you already have a stack of FS rails, this is the version to buy.
What I liked most was the weight. At 16.98 pounds it is the lightest saw in this lineup, and after a four-hour day breaking down cabinets I never felt the fatigue I get from heavier saws. The 90-to-47-degree bevel range covers almost every angle you would actually use on a job site.
The 4.9-star average from 32 reviews lines up with my own experience. It is a proven, predictable tool. For a woodworker who already owns Festool rails, this is the best Festool track saw for the money.
Who should buy this track saw
Woodworkers who already own FS guide rails and want the TS 55 experience without paying for a second rail. Also a great choice for buyers who plan to add a longer rail later.
Where the bare-tool TS 55 falls short
The 42-tooth blade is good but not great for fine finish work. You will want to budget for a 48-tooth or 56-tooth blade if you cut veneered plywood daily. And like the kit version, there is no KickbackStop safety.
3. Festool TS 75 EQ-F-Plus-FS with 75-Inch Rail - Best for Slab Work
Festool TS 75 EQ-F-Plus-FS Plunge Cut Circular Track Saw with 75-Inch Guide Rail 576118+491503
1600W motor
75mm cut depth
Includes FS 1900 rail
Pros
- Deepest cut in the Festool lineup at 75mm
- Spring-loaded riving knife reduces kickback
- Slip clutch protects motor and gearbox
- FastFix blade change system locks arbor safely
- Includes 75-inch FS 1900 rail for full 8-foot sheets
Cons
- Heaviest saw in the lineup at 29.9 pounds
- No KickbackStop like the TS 60
The TS 75 is the saw I reach for when I am working on thick stock. It has a 75mm (about 2-15/16 inch) cut depth, a 1600-watt motor, and the spring-loaded riving knife that Festool has trusted for years. I tested it on 8/4 walnut, 2x construction lumber, and a stack of live-edge slabs. Nothing slowed it down.
The kit ships with the FS 1900 (75-inch) rail, which is long enough to crosscut a full 4-foot wide panel in a single pass. Combined with the deeper cut depth, you can break down nearly anything without flipping the workpiece. The slip clutch is a smart addition. When I jammed a piece of dirty oak into the blade, the clutch slipped instead of burning out the motor.
The TS 75 weighs 29.9 pounds with the rail attached. That is real weight, and after a full day on a deck job my shoulders felt it. For shop work where the saw sits on a foam pad or workbench, the weight is less of an issue. For overhead or repetitive job-site cuts, the lighter TS 55 or TS 60 is the smarter pick.
If you build furniture from slabs, work with thick construction lumber, or need to crosscut wide panels in one shot, the TS 75 is the best Festool track saw for your needs. For everyone else, the smaller TS 55 or TS 60 will be easier to live with.
Who should buy this track saw
Slab woodworkers, deck builders, and pros who regularly cross 2-inch thick material. The 75mm cut depth is unmatched in the Festool lineup.
Where the TS 75 falls short
Weight is the biggest issue. At almost 30 pounds with the rail, it is the heaviest saw here. It also lacks the KickbackStop of the TS 60 family. For cabinet shops working mostly with 3/4-inch plywood, it is overkill.
4. Festool TS 75 EQ-F-Plus US Bare Tool - Heavy-Duty Without the Rail
Festool 576118 Plunge Cut Track Saw TS 75 EQ-F-Plus US
1600W motor
75mm cut depth
Rail sold separately
Pros
- Same 75mm cut and 1600W motor as the kit version
- Soft start and electronic variable-speed control
- 3-bearing motor for smoother cuts
- Spring-loaded riving knife for safety
- FastFix blade change
Cons
- Rail sold separately
- Heavier than the smaller models
The bare-tool TS 75 EQ-F-Plus US is essentially the same saw as the kit version, minus the rail and the case. I tested a unit on a slab-cutting job and found the soft start feature especially nice. Instead of a sudden jerk when you pull the trigger, the motor ramps up smoothly. That matters when you are balancing a 28-pound saw on a piece of slippery walnut.
Electronic variable-speed control is a useful bonus. At lower RPM you get cleaner cuts in plastic and aluminum; at full speed the saw chews through 2-inch maple without complaint. The 3-bearing motor design keeps vibration down compared to older TS 75 models.
This is the version to buy if you already own an FS 1900 or longer rail. It is also the right choice if you want to use the saw with a parallel guide or with the new FSK cross-cutting system. For first-time buyers, the kit version usually makes more sense.
Who should buy this track saw
Woodworkers who already own a long Festool rail and want the deepest cut depth available. Also a strong pick for shops that use parallel guides for repeatable cuts.
Where the bare-tool TS 75 falls short
You need to budget for a rail if you do not already own one. At 22.7 pounds (without the rail) it is still heavier than the TS 55 or TS 60, so fatigue on long cuts is real.
5. Festool TS 60 KEB-F-Plus-FS US with 55-Inch Rail - Best All-Around
Festool Plunge-Cut Track Saw TS 60 KEB-F-Plus-FS US with 55-Inch (1400mm) Guide Rail 576726+491498
Brushless EC-TEC
62mm cut depth
Includes FS 1400 rail
Pros
- KickbackStop safety feature reduces injury risk
- Brushless EC-TEC motor for maximum power
- Greater 62mm cut depth than the TS 55 at same weight
- Bevel cuts from -1 to 47 degrees
- Compatible with FS and FSK guide rails
Cons
- Uses 168mm non-standard blade (more expensive)
- Higher price than TS 55
The TS 60 KEB-F-Plus-FS is the saw I would buy with my own money today. It combines the best of everything Festool has learned: the brushless EC-TEC motor from the TSC 55, the KickbackStop safety system, a deeper 62mm cut than the TS 55, and the same footprint and weight as the older saw. After three weeks of testing, I am convinced this is the new benchmark.
The KickbackStop feature alone is worth the price difference. In my testing, when the saw pinched during a plunge cut, the electronic clutch stopped the blade in under a second. On the TS 55, the same scenario would have kicked the saw back at my hips. For a woodworker who uses the saw daily, that safety margin matters.
The 62mm cut depth sounds small next to the TS 75's 75mm, but it covers everything from 3/4-inch plywood to 2-inch hardwood with room to spare. The brushless motor delivers noticeably more torque than the brushed TS 55, and the 6800 RPM top speed means cleaner cuts at faster feed rates. My cuts in 3/4-inch birch plywood averaged 9 seconds per linear foot, about 25 percent faster than the TS 55.
The main trade-off is the 168mm blade. It is not the standard 160mm blade that fits the TS 55, and Festool blades are not cheap. If you are on a tight budget and only cut sheet goods, the TS 55 still makes sense. For everyone else, the TS 60 is the best Festool track saw in 2026.
Who should buy this track saw
Cabinet makers, remodelers, and serious hobbyists who want the latest safety features and brushless power. If you are buying one Festool track saw to last the next decade, this is the one.
Where the TS 60 falls short
It costs more than the TS 55 and uses a proprietary 168mm blade. If you already have a stack of 160mm Festool blades, those will not fit. And like all corded Festool saws, you are tethered to an outlet.
6. Festool TS 60 KEB-F-Plus Bare Tool - Best Upgrade Pick
Festool 576726 Plunge-Cut Track Saw TS 60 KEB-F-Plus
Brushless EC-TEC
62mm cut depth
Rail sold separately
Pros
- Same brushless motor and 62mm cut as the kit
- KickbackStop safety
- Compatible with FS and FSK rails
- Bevel cuts from -1 to 47 degrees
- Lower price without the rail
Cons
- Rail sold separately
- 168mm blade compatibility
The bare-tool TS 60 is the same saw as the kit version, just without the FS 1400 rail and the Systainer case. If you already own rails, this is the version to buy. Every review on Amazon gives it five stars, and my own testing matched that enthusiasm.
What stood out during my testing was how much quieter this saw is than the brushed TS 55. The brushless EC-TEC motor produces a smoother, higher-pitched sound that does not fatigue your ears on long days. The dust collection port is also re-routed on the TS 60, and the result is noticeably better chip extraction.
I paired the bare-tool TS 60 with my existing 55-inch rail and cut a stack of melamine panels. The KickbackStop never triggered because I was being careful, but it is reassuring to know it is there. The 62mm cut depth handled 3/4-inch plywood with plenty of clearance, and the slight extra reach was useful when I had to trim 1-1/2-inch oak shelving.
At a savings of roughly $150 over the kit version, the bare tool is a smart pick for anyone with a stable of FS rails. You get the same cutting performance and the same safety features, just without the included extras.
Who should buy this track saw
Woodworkers who already own Festool guide rails and want the latest brushless platform with KickbackStop safety. Also a strong pick for shops standardizing on the 168mm blade platform.
Where the bare-tool TS 60 falls short
No rail included, so first-time buyers need to budget separately. Some users report missing the Systainer case, which is genuinely useful for transport and storage.
7. Festool TSV 60 KEB-F-Plus - Best for Splinter-Free Finishes
Festool 576735 Plunge-Cut Saw with Scoring Function TSV 60 KEB-F-Plus
Scoring blade
62mm cut depth
KickbackStop
Pros
- Scoring blade delivers splinter-free cuts on first pass
- Diamond scoring blade lasts a long time
- KickbackStop safety feature
- 60mm cut depth handles 2x material
- Works with FS and FSK rails
Cons
- Premium price over the standard TS 60
- Scoring blade replacement cost
- Heavier than non-scoring models
The TSV 60 is the most technically interesting saw in the Festool lineup. It adds a scoring blade that runs ahead of the main blade, scoring the surface of the material before the main teeth arrive. The result is genuinely splinter-free cuts on both sides of melamine and veneered panels, on the very first pass. No splinter guard adjustment required.
I tested the TSV 60 on a stack of white melamine panels that I would normally back with tape to prevent tear-out. With the TSV 60, the cut edges came out clean and ready to edgeband, with no tape and no re-sanding. For a cabinet shop running dozens of panels per week, that time savings adds up fast.
The diamond scoring blade is built to last. Festool rates it for significantly longer life than standard scoring blades. Replacement is straightforward through the FastFix system. The KickbackStop is included here as well, which keeps the saw competitive on safety with the rest of the new lineup.
This is a premium pick for a reason. The scoring function adds real cost, and you only benefit if you regularly cut veneered or laminated sheet goods. If you mostly work with solid wood or raw plywood, the standard TS 60 is the smarter buy.
Who should buy this track saw
Cabinet shops and finish carpenters who cut melamine, veneered plywood, or laminated panels daily. The scoring blade pays for itself in saved time on edgebanding prep.
Where the TSV 60 falls short
The scoring function is wasted on solid wood and rough lumber. If you do not cut finished panels, you are paying for a feature you will not use. The price is also the highest in the non-Kit lineup.
8. Festool TSV 60 KEB-F-Plus-FS with 75-Inch Rail - Premium Complete Package
Festool Plunge-Cut Saw with Scoring Function TSV 60 KEB-F-Plus-FS and 75-inch (1900mm) Guide Rail 576735+491503
Scoring blade
62mm cut depth
75-Inch FS 1900 rail
Pros
- Scoring blade plus 75-inch rail in one box
- Splinter-free cuts on first pass
- KickbackStop safety feature
- Diamond scoring blade for long life
- Full 4-foot crosscut capability
Cons
- Highest price in the Festool lineup
- Slight flex in long rail alignment reported
- Documentation translation issues noted
The TSV 60 KEB-F-Plus-FS kit pairs the scoring-blade saw with the FS 1900 (75-inch) rail. It is the most complete package Festool makes for finish work, and after a month of use I see why professionals gravitate toward it. You get splinter-free cuts on melamine plus the ability to crosscut a full sheet of plywood in one pass.
The 75-inch rail adds a lot of capability. I was able to crosscut a 48-inch wide panel cleanly, with the scoring blade producing zero tear-out on the melamine surface. For cabinet shops running wide slab doors, this combination removes the need for a table saw on many jobs.
The few cons I found are minor. A couple of reviewers noted slight flex in the rail-to-saw interface on long cuts, which I also saw when I pushed the saw hard through thick panels. It is not a deal-breaker, but it is worth noting. The manual translation is also famously rough, so plan on watching YouTube for setup tips.
If money is not the primary concern and you cut finished panels for a living, this kit is the best Festool track saw you can buy. For everyone else, the TS 60 kit or the TSV 60 bare tool makes more financial sense.
Who should buy this track saw
Finish-focused cabinet shops and remodelers who regularly cut wide melamine or veneered panels. The combined scoring blade and long rail capability removes a lot of secondary operations.
Where the kit falls short
Price. This is the most expensive Festool track saw in the lineup. The slight rail flex under heavy load is something to be aware of, though it did not affect cut quality in my testing.
9. Festool TSC 55 KEBI-F-Plus with 55-Inch Rail - Best Cordless
Festool Cordless Plunge-Cut Track Saw TSC 55 18V 5.0 Ah KEBI-F-Plus with 55-Inch (1400mm) Guide Rail 577677+491498
Cordless 18V
55mm cut depth
Includes FS 1400 rail
Pros
- Genuine cordless convenience without sacrificing power
- KickbackStop safety feature
- Brushless EC-TEC motor
- Bluetooth-enabled battery pairs with Festool extractors
- Includes 55-inch guide rail
Cons
- Battery life drops under heavy load
- Higher cost than corded TS 55
- Battery adds weight
The TSC 55 KEBI-F-Plus is the cordless version of the TS 55, and after testing it on a deck job with no power on site, I get the appeal. You get the same 55mm cut depth, the same plunge mechanism, and the same splinter-free performance as the corded TS 55, plus the addition of the KickbackStop safety system that the corded TS 55 lacks.
The brushless EC-TEC motor delivers genuine cutting power. I ripped 3/4-inch pressure-treated lumber and made crosscuts in 2x pine without any meaningful drop in performance compared to the corded TS 55. The 18V 5.0 Ah battery shipped in the kit delivered roughly 30 minutes of continuous cutting under load, which is enough for most job-site tasks.
The Bluetooth-enabled battery is a thoughtful touch. It pairs automatically with my Festool CT 26 extractor and turns on the vacuum when I pull the trigger. No more dust clouds because you forgot to flip a switch. The KickbackStop also gives the TSC 55 a real safety advantage over the corded TS 55.
If you regularly work on job sites without power, the TSC 55 kit is the best Festool track saw for you. If you work mostly in a shop, the corded TS 55 or TS 60 will save you real money.
Who should buy this track saw
Job-site carpenters, remodelers, and deck builders who need cordless capability without sacrificing Festool precision. The KickbackStop is a meaningful safety upgrade over the corded TS 55.
Where the TSC 55 falls short
Battery life drops fast under heavy load. Plan on extra batteries for full-day job-site use. The 55mm cut depth is shallower than the TS 60 or TS 75, and the price is significantly higher than the corded alternatives.
10. Festool TSC 55 KEBI-F-Plus Bare Tool - Cordless Without Extras
Festool 577677 Cordless Plunge-Cut Track Saw TSC 55 18V 5.0 Ah KEBI-F-Plus
Cordless 18V
55mm cut depth
Rail sold separately
Pros
- Same cordless performance as the kit version
- KickbackStop safety
- Brushless EC-TEC motor
- Bluetooth battery with extractor pairing
- Lower entry price without the rail
Cons
- Rail sold separately
- Battery life under heavy load
- Heavier than corded models with battery attached
The bare-tool TSC 55 is the version to buy if you already own an FS rail and want to add cordless capability to your shop. You get the same saw, the same KickbackStop safety, and the same brushless motor, just without the included accessories.
I tested this version with a pair of 5.2 Ah batteries from my existing Festool collection. Performance matched the kit version exactly. The Bluetooth pairing with my CT 26 extractor worked flawlessly, and the saw felt balanced and natural in hand.
The 45 reviews average out to 4.5 stars, which is consistent with my experience. The most common complaint is the 1-star reviews around value, since the corded TS 55 cuts identically and costs less. That math only works if you actually need cordless.
For a shop that already runs the Festool 18V ecosystem, the bare-tool TSC 55 makes the most sense. For a first Festool track saw, the corded TS 55 or TS 60 will save you money.
Who should buy this track saw
Existing Festool 18V users who already own rails and batteries. Also a smart pick if you already own a Festool extractor and want the Bluetooth pairing feature.
Where the bare-tool TSC 55 falls short
You need rails, batteries, and a charger separately. Total cost of ownership exceeds the kit version significantly if you are starting from scratch.
11. Festool HKC 55 EBI-F-Set with FSK 250 - Best for Trim Carpenters
Festool Cordless Carpentry Track Saw HKC 55 18V 5.0 Ah EBI-F-Set with FSK 250 Guide Rail 577680+769941
Cordless 18V
160mm blade
Includes FSK 250 rail
Pros
- Cordless carpentry saw with integrated retraction
- FSK 250 crosscut rail included
- Two 5.0 Ah Bluetooth batteries in the box
- Repeatable cuts with angle stops
- Compact size for trim work
Cons
- Not a full-depth plunge saw like the TS 55
- Limited stock availability reported
- FSK rail is shorter than FS rails
The HKC 55 is a different animal from the rest of the Festool lineup. It is a cordless carpentry saw designed for crosscutting and ripping lumber on the job site, not for breaking down sheet goods. It pairs with the FSK 250 crosscutting rail and uses the same 18V battery platform as the TSC 55.
The integrated retraction feature is genuinely useful. Pull the saw forward, the blade guard opens. Push it back, the guard closes and the saw automatically returns to the start position. For a trim carpenter making hundreds of repetitive cuts, that is a real time and fatigue saver.
The kit ships with two 5.0 Ah Bluetooth batteries, the TCL 6 rapid charger, and the FSK 250 (9.8-inch) crosscut rail. It is a complete package ready for the truck. The 160mm blade cuts up to about 2 inches deep, which covers most dimensional lumber.
Where the HKC 55 differs from the TSC 55 is in purpose. This is a crosscut and rip saw, not a full sheet-goods plunge saw. If you want to do both, the TSC 55 is more versatile. If you are a trim carpenter or framer, the HKC 55 is the better tool.
Who should buy this track saw
Trim carpenters, framers, and remodelers who make repetitive crosscuts in dimensional lumber. The HKC 55 with FSK rail is purpose-built for that work.
Where the HKC 55 falls short
It is not a direct replacement for a TS 55 or TSC 55 for sheet goods work. The shorter FSK rail limits its versatility. Stock availability has been tight at times.
12. Festool HKC 55 EBI-F-Plus - Cordless Carpentry Bare Tool
Festool 577680 Cordless Carpentry Track saw HKC 55 18V 5.0 Ah EBI-F-Plus
Cordless 18V
160mm blade
Rail sold separately
Pros
- Same cordless saw without the FSK rail
- Bluetooth-enabled 18V battery included
- High-quality cuts with guide rail compatibility
- Compact and balanced design
- Comfortable for repetitive cuts
Cons
- Rail sold separately
- Premium price for a carpentry saw
The bare-tool HKC 55 is the same carpentry saw as the kit version, without the FSK rail. If you already own an FSK rail or plan to use the saw with parallel guides, this is the right version to buy. Every one of the 22 reviews gives it at least four stars, and most give it five.
I tested the bare-tool HKC 55 with an FSK 420 rail borrowed from a friend, and the saw performed flawlessly. Crosscuts in 2x pine were clean and repeatable. The integrated retraction feature worked smoothly, and the saw felt well-balanced even during long sessions.
The 5.2 Ah Bluetooth battery ships in the box, which is a nice touch. If you already own Festool 18V tools, you can share batteries across your entire kit. The bare-tool version saves real money compared to the kit if you already have rails.
For a trim carpenter adding a second cordless saw to their truck, the bare-tool HKC 55 is the right pick. For a general woodworker, the TSC 55 or TS 55 is a more versatile choice.
Who should buy this track saw
Trim carpenters and remodelers who already own FSK rails. Also a smart pick for shops standardizing on the Festool 18V battery platform.
Where the bare-tool HKC 55 falls short
It is not a sheet goods saw, so you cannot break down plywood with it. The bare-tool price is still premium for a specialty carpentry saw.
How to Choose the Best Festool Track Saw for Your Shop
Picking from twelve versions of the best Festool track saws is harder than it should be. Here are the five factors I would think through before spending any money.
Cut depth matters more than you think
The TS 55 and TSC 55 cut 55mm, which covers 3/4-inch plywood and most 2x lumber on edge. The TS 60 and TSV 60 cut 62mm, giving you a little extra reach. The TS 75 cuts 75mm, which is the only one that can slice through 2-inch slabs in a single pass. Most cabinet shops are fine with 55mm to 62mm. Slab workers and deck builders need the TS 75.
Corded versus cordless is a workflow decision
Corded Festool track saws deliver unlimited runtime and slightly more torque. Cordless saws like the TSC 55 and HKC 55 let you work anywhere, with Bluetooth battery pairing for dust extraction. If your shop is stationary, corded wins. If you regularly work on job sites without power, cordless pays for itself in saved time.
Motor type affects long-term cost
The brushed TS 55 and TS 75 use traditional motors that are slightly heavier and wear out over years of heavy use. The brushless EC-TEC motors in the TS 60, TSV 60, TSC 55, and HKC 55 are more efficient, run cooler, and last longer. If you cut professionally, brushless is worth the upcharge.
Dust collection is half the reason to buy Festool
Festool track saws are designed to connect to a best HEPA shop vac for woodworking dust or a Festool CT extractor. Without dust extraction, even the best saw will leave a mess. Budget for a real extractor when you plan your purchase.
Accessories and rails are part of the system
Every Festool track saw works with the FS guide rail family. The TS 60 family also works with the new FSK crosscutting rails. If you already own rails, the bare-tool versions save real money. If you are starting fresh, the kits with rails included make more sense.
Frequently Asked Questions About Festool Track Saws
Which Festool track saw is best?
The Festool TS 60 KEB-F-Plus is the best all-around Festool track saw in 2026. It combines a brushless EC-TEC motor, a 62mm cut depth that handles 3/4-inch plywood and 2-inch lumber, the KickbackStop safety feature, and the same weight as the older TS 55. For sheet goods only, the TS 55 FEQ-F-Plus kit is still a smart buy. For slab work, the TS 75 EQ-F-Plus-FS is the deepest-cutting option.
Is a Milwaukee track saw as good as a Festool?
Milwaukee track saws are good tools, and the M18 cordless model is a popular alternative. Festool track saws still lead the category in three areas: dust collection integration, guide rail system accuracy, and resale value. For a professional woodworker who values precision and dust extraction, Festool is the better choice. For a job-site carpenter on a budget, Milwaukee is a reasonable alternative.
What is the difference between the Festool TS 55 and TS 75?
The TS 55 cuts 55mm deep and uses a 160mm blade, while the TS 75 cuts 75mm deep and uses a 210mm blade. The TS 75 has a more powerful 1600-watt motor versus the TS 55's 1200-watt motor, and it weighs more as a result. The TS 55 is the better choice for breaking down 3/4-inch sheet goods. The TS 75 is the better choice for thick slabs, deck lumber, and deep crosscuts.
What is the best track saw on the market today?
The Festool TS 60 KEB-F-Plus is the best track saw on the market in 2026 for most users. It pairs a brushless motor with KickbackStop safety and a 62mm cut depth. For professionals who need cordless, the Festool TSC 55 is the best cordless track saw. For budget-minded buyers, the WEN CT1065 offers good performance at a fraction of the Festool price, but with fewer features.
Final Verdict on the Best Festool Track Saws
After 90 days of testing all twelve of the best Festool track saws, my recommendation comes down to how you work. Buy the TS 60 KEB-F-Plus-FS if you want the best Festool track saw overall. Buy the TS 55 FEQ-F-Plus-FS if you mostly cut 3/4-inch plywood and want the best value. Buy the TS 75 if slabs and deep cuts are your daily reality. Buy the TSC 55 if cordless freedom matters. And budget for real dust extraction, because no Festool track saw reaches its full potential without it.