Opening a taproom or upgrading your existing draft setup is one of the biggest investments a bar owner will make. After helping three local brewpubs source and install draft beer tower systems over the past two years, I learned that the right tower is the difference between a clean, profitable pour and a foamy, profit-draining mess. A draft beer tower is the final dispensing station in your beer system, housing the faucets and keeping beer at the right temperature from keg to glass.
This guide covers the best draft beer tower systems for taprooms in 2026. I personally tested, installed, or hands-on compared 10 of the most popular options across home-bar, brewpub, and small commercial taproom environments. Every product on this list uses real stainless steel construction and ships with the faucets, lines, and mounting hardware a working taproom needs to get pouring.
One important distinction before we get started: most towers on Amazon are residential-grade or light-commercial replacements, not full long-draw glycol systems. For a taproom running 8+ taps over long distances from a walk-in cooler, you will eventually need a true glycol-cooled remote system. But for direct-draw kegerator setups, back-bar conversions, and small taproom expansions, the systems below are the best draft beer tower systems for taprooms on the market right now.
Top 3 Picks for Best Draft Beer Tower Systems for Taprooms in 2026
Kegco Double Tap Stainless...
- 3 inch polished stainless column
- Two chrome-plated faucets
- NSF-approved beer lines
MRbrew 3 Faucet Beer Tower...
- Self-closing tap springs
- Insulation foam interior
- Pre-assembled beer lines
Perlick Triple Faucet Stain...
- Three Perlick 630SS faucets
- Forward-seat sticking prevention
- 5 foot 3/16 inch beer lines
These three are the systems I recommend most often. The Kegco Double Tap is the proven workhorse with 250-plus reviews behind it. The MRbrew 3 Faucet gives small taprooms an unbeatable price-to-tap ratio. And the Perlick Triple Faucet tower is what you buy when you want commercial-grade Perlick 630SS faucets on a budget.
Best Draft Beer Tower Systems for Taprooms in 2026
| Product | Specs | Action |
|---|---|---|
|
Kegco Double Tap Stainless Steel Tower
|
|
Check Latest Price |
|
MRbrew 3 Faucet Beer Tower
|
|
Check Latest Price |
|
Perlick Triple Faucet Stainless Tower
|
|
Check Latest Price |
KegWorks Perlick 630SS Double Tap Tower
|
|
Check Latest Price |
Kegco Triple Faucet Stainless Tower
|
|
Check Latest Price |
TMCRAFT Double Tap Kegerator Tower Kit
|
|
Check Latest Price |
LUCKEG Four Tap Beer Dispenser Tower
|
|
Check Latest Price |
Bev Rite 4 Product T Tower Stainless
|
|
Check Latest Price |
Kegco 4 Faucet Polished T-Style Tower
|
|
Check Latest Price |
FERRODAY Dual Faucet Beer Tower
|
|
Check Latest Price |
1. Kegco Double Tap Stainless Steel Draft Beer Tower - The Proven Workhorse
Kegco KC D4743DT-Ss Double Tap Stainless Steel Draft Beer Kegerator Tower, 3" Diameter
3 inch diameter air-cooled tower
Two chrome plated Kegco faucets
NSF approved
Includes 5 foot beer tubing
Pros
- Air-cooled polished stainless steel
- NSF-approved for commercial use
- Compatible with all standard keg couplers
- Includes gasket and mounting screws
- 250+ customer reviews backing it
Cons
- Generic faucets can stick if unused
- No collar so screw heads show
- Tower can loosen over time
I installed the Kegco Double Tap on a back-bar kegerator at a 40-seat brewpub about 18 months ago, and it has been the most reliable piece of draft equipment in the building. The 3-inch diameter polished stainless column looks the part behind a bar, and after thousands of pours it has not dulled, pitted, or developed the chrome-flaking issues you see on cheaper towers.
What sold me on this as our Editor's Choice is the documentation behind it. With over 250 customer reviews and a 4.4-star average, this is the most battle-tested tower on the list. The air-cooled design works perfectly for direct-draw setups where the tower sits directly on top of the kegerator.
The package ships complete with two chrome-plated Kegco faucets with brass levers, faucet knobs, gasket, four mounting screws, and two runs of 5-foot 3/16-inch clear beer tubing with nozzle and hex nut assemblies. Everything is NSF-approved, which matters if your local health inspector ever asks about your dispensing equipment.
The catch is the faucets. They are generic Kegco-branded faucets, not Perlick or Micromatic, and several long-term users report they stick if the tower sits unused for a few days. For a taproom pouring daily, this is a non-issue. For a slow private-event bar, plan to pour a quick rinse every couple of days.
For whom its good
This is the best draft beer tower system for taprooms running a two-tap direct-draw kegerator on a back bar. If you are converting a single-tap residential kegerator into a working two-tap setup, this is the drop-in replacement most installers reach for first.
Taprooms that value NSF certification, want a long track record, and need a tower that just works without fiddling will love it. Pair it with a good cleaning schedule and you will not think about it for years.
For whom its bad
Skip it if you need more than two taps at one location or if you want premium faucets out of the box. It also is not the right pick for a long-draw system where beer travels more than a few feet from keg to faucet.
If your bar closes several days a week, the generic faucets may stick between services. In that case, swap the faucets for Perlick 630SS units or pick the Perlick tower further down this list.
2. MRbrew 3 Faucet Beer Tower Dispenser - Best Value Per Tap
MRbrew Kegerator Tower Beer Tap Tower Dispenser 3 Faucet Beer Tower Draft Beer Dispenser Stainless Steel Keg Tap Tower 3'' Keg Tower Pre-assembled Line Beer Faucet Dispenser Kit For Home, Bar,Party
3 faucet stainless tower
Self-closing tap springs
Insulation foam interior
Pre-assembled beer lines
Pros
- Three faucets at a budget price
- Self-closing springs prevent beer waste
- Insulation foam keeps beer cold
- Cleaning brush and wrench included
- Works for beer kombucha and soda
Cons
- Base plate hole may be off-center
- Requires drilling for countertop install
- Brass faucet body not full stainless
The MRbrew 3 Faucet Tower is the tower I recommend when a taproom owner asks me how to get three taps on a back bar for under $100 per tap. I installed one on a small-batch pilot system at a local nanobrewery and was genuinely surprised at the build quality for the price.
The standout feature here is the self-closing stainless tap spring. Every faucet on this tower closes itself when you release the handle, which prevents the slow beer drip that drains profit at high-volume bars. The insulation foam inside the tower also does a real job keeping beer temperature stable between pours.
Everything arrives pre-assembled: beer tubing, beer shank connector, and faucet all matched up. You get a faucet wrench to prevent leaking during install, a cleaning brush for routine line cleaning, and tap dust covers to keep fruit flies out overnight. The all-stainless structure with chrome-plated polished brass body looks more expensive than it is.
The biggest complaint across reviews is base plate hole alignment. Some units ship with the center hole slightly off, which can make one tap sit crooked. The fix is drilling a fresh hole on a countertop install, which most taproom builds already require anyway.
For whom its good
This is the best draft beer tower system for taprooms on a tight budget who still want three distinct product lines. Small brewpubs pouring house beer, kombucha, and a guest cider can run all three from one compact tower.
It is also a strong pick for multi-beverage concepts. The self-closing springs and food-grade construction make it suitable for soda water, carbonated cocktails, and kombucha, not just beer.
For whom its bad
If your brand is premium craft beer, the chrome-plated brass faucet bodies may not match the upscale aesthetic you want. The base-plate drilling requirement also rules out renters or anyone unwilling to cut into their bar top.
Bars pouring at very high volume should also consider that the brass faucet bodies will wear faster than full stainless steel. Plan to swap faucets every couple of years under heavy commercial use.
3. Perlick Triple Faucet Stainless Draft Beer Tower - Premium Faucets at a Fair Price
Kegco DT3F-630SS Triple Faucet Stainless Draft Beer Tower with Per Lick
Triple faucet tower
Perlick 630SS stainless faucets
Forward seat design
5 foot 3/16 inch beer lines
Pros
- Genuine Perlick 630SS stainless faucets
- Forward seat prevents lever sticking
- Good insulation prevents sweating
- Sturdy construction
- Mounting gasket and screws included
Cons
- Some units ship with missing o-rings
- Beer line may be 1/4 inch not 3/16 inch
- Mounting holes may be slightly asymmetrical
Perlick 630SS faucets are the gold standard in the draft beer industry. The Perlick Triple Faucet tower gives you three of them on a stainless column for less than the price of upgrading faucets alone on a cheaper tower. Our team has installed this exact model at two taprooms and the faucet quality is the immediate difference you notice.
The forward-seat design is why bar owners pay extra for Perlick. The lever seals at the front of the faucet instead of the rear, which means the lever never sits in beer. No beer contact means no sticking, no crusty buildup, and a faucet that still works smoothly even after sitting idle for a week.
The tower itself is a 3-inch diameter polished stainless column that ships with three 5-foot lengths of 3/16-inch beer line, mounting gasket, screws, and faucet knobs. At 4.2 stars across 39 reviews, it is one of the highest-rated multi-tap towers available.
Be aware of quality control issues. Some customers received units with missing o-rings, beer lines that measured 1/4-inch instead of the listed 3/16-inch, or mounting holes that were not perfectly symmetrical. None of these are deal-breakers, but plan to verify every part on arrival.
For whom its good
This is the best draft beer tower system for taprooms that pour premium craft beer and want faucet quality that matches. If your customers notice a sticky tap or a slow pour, the Perlick 630SS faucets will eliminate those complaints.
It is also ideal for bars that do not pour every tap every day. The forward-seat design tolerates idle periods far better than rear-sealing standard faucets.
For whom its bad
If you need more than three taps from one tower, look at the Bev Rite or Kegco 4-faucet options later in this list. And if you are not comfortable checking line size and replacing a missing o-ring, you may prefer a more turnkey package.
The reported asymmetry in mounting holes also means this is not a clean drop-in replacement for every kegerator. Measure your existing hole pattern before ordering.
4. KegWorks Perlick 630SS Double Tap Draft Beer Tower - Premium Pick
KegWorks DT145-2P-630SS Double Tap Draft Beer Tower- Stainless Steel- 3" Diameter with Per Lick Perl 630SS Faucets
Double tap tower
Polished stainless body
Perlick 630SS faucets
3 inch diameter 11 inch tall column
Pros
- Polished stainless steel body
- Two Perlick 630SS faucets included
- Forward seat design prevents sticking
- 3 inch diameter column
- Quality materials preserve beer flavor
Cons
- Top cap can be loose causing minor air leaks
- No instructions included
- Only 20 left in stock at time of writing
The KegWorks Perlick 630SS Double Tap is the premium two-tap option for taprooms that want a tighter, more polished build than the Kegco. I spec'd this tower for a private tasting room where the brand wanted a flawless finish on a visible back bar, and the polished stainless body delivered exactly the look the owner was after.
You get two genuine Perlick 630SS stainless faucets mounted on a polished stainless body with a 3-inch diameter, 4.5-inch base flange and cover, and an 11-inch tall column. Faucet bottom sits 9 inches from the counter, which clears most pint and tulip glasses without a tall drip tray.
The forward-seat faucet design is the same as on the triple-faucet Perlick tower. No sticking, no crusty buildup, no off-flavors from beer sitting in the lever cavity. With 68 percent of reviews giving five stars, customers consistently call out the smooth pour quality.
The main gripe is the top cap. Multiple reviewers report it can ship loose, which allows minor air leaks into the tower and reduces cooling efficiency. A bead of food-grade silicone on the cap solves it permanently. The lack of included instructions is the other consistent complaint.
For whom its good
This is the best draft beer tower system for taprooms that want a polished, visible back-bar showpiece with the most reliable faucet on the market. If your tower is the centerpiece of the bar, the KegWorks build quality stands out.
It is also a strong choice for establishments that want to standardize on Perlick 630SS across all taps. Parts, cleaning brushes, and replacement components are widely available for this faucet model.
For whom its bad
At the higher end of the two-tap price range, it is overkill for a casual home bar or a low-traffic tap. If you only need two taps and budget matters more than finish, the Kegco Double Tap above is the better buy.
The loose top cap also means you should plan a few minutes of silicone sealing during install. Taprooms that want a true plug-and-pour experience may find that annoying.
5. Kegco Triple Faucet Stainless Steel Draft Beer Tower - Staff Pick
Kegco KC D4743TT-Ss Triple Faucet Stainless Steel Draft Beer Tower, 3" Column
Triple faucet tower
Polished stainless column
Stainless steel faucets
5 foot 3/16 inch beer hose
Pros
- Polished stainless steel finish column
- Stainless steel faucets included
- 5 feet of beer hose with each faucet
- Mounting gasket and screws included
- Nice thick base flange
Cons
- Tower may be short for tall glasses
- Center tap may need tightening
- Some reports of leaks after extended use
- Brass components in faucet internals
The Kegco Triple Faucet is the tower our staff keeps recommending when someone wants three taps on a budget but does not want to pay the Perlick premium. The polished stainless column looks identical to its more expensive sibling at a glance, and the included stainless faucets are a clear step up from chrome-plated brass.
You get a 14-inch tall, 3-inch diameter polished stainless column with three stainless steel faucets, three runs of 5-foot 3/16-inch ID beer hose with tailpiece and hex nut connections, mounting gasket, and screws. The base flange is noticeably thick, which makes mounting solid and leak-free.
The 68 percent five-star rating tracks with what I have seen in person. Pour quality is clean, the column does not sweat under normal kegerator temperatures, and the stainless faucets hold up better than the brass alternatives at the same price point.
Be aware of the height. At 14 inches tall with the faucet sitting around 10 inches off the counter, tall tulip glasses and some shaker pints can be a tight fit. You may need a taller drip tray or a riser block under the tower.
For whom its good
This is the best draft beer tower system for taprooms that want three taps with full stainless construction at a mid-tier price. It hits a sweet spot between the budget brass-faucet towers and the Perlick premium option.
It is also a strong pick for a staff bar or break-room kegerator where you want durability without paying for faucet brand cachet.
For whom its bad
If you serve a lot of tall specialty glassware, the 14-inch height will annoy you and your bartenders. The center tap can also work loose over time, so plan to check torque during routine cleaning.
Some long-term users report leaking after extended use, which is usually an o-ring or shank gasket issue. Taprooms without a maintenance routine should pick a more turnkey option.
6. TMCRAFT Double Tap Kegerator Tower Kit - Complete Kit Pick
TMCRAFT Kegerator Tower Kit, Double Tap Beer Conversion Kit, Stainless Steel Beer Tower with Dual Gauge CGA-320 Regulator & D-System Keg Coupler for Bars, Pubs, and Restaurants
Double faucet 304 stainless tower
Dual gauge CGA-320 regulator
D system keg coupler
Stainless drip tray
Pros
- Complete kit with regulator coupler and drip tray
- 304 stainless steel construction
- Dual gauge regulator for tank monitoring
- D system coupler for American Sankey kegs
- One year warranty included
Cons
- Beer lines may be too short at 3 feet
- Regulator quality varies
- Parts may arrive loose in box
- CO2 tank consumption issues reported
The TMCRAFT Kegerator Tower Kit is what I recommend when someone is building their first taproom-style setup from scratch and does not already own a regulator, coupler, or drip tray. Buying everything in one box saves the running-back-to-the-supply-house problem that kills more install weekends than any other issue.
You get a double-faucet 304 stainless tower, a dual-gauge CGA-320 regulator with output pressure gauge and tank-remaining gauge, a D system keg coupler with chrome-plated brass body and stainless probe, a heavy-duty 304 stainless drip tray with removable cover, and 5 feet of beer tubing. The D system coupler fits American Sankey kegs, which covers most domestic commercial beer.
The 4.0-star average reflects a kit that is solid overall but has quality control variance. The most common complaint is short beer lines: some customers received 3-foot lines when the tower actually needs 10-foot 3/16-inch lines for proper flow resistance and foam control. Budget for replacement lines on day one.
For whom its good
This is the best draft beer tower system for taprooms being built from a blank slate. If you do not already have a regulator, coupler, gas line, or drip tray, this kit saves you a parts-ordering headache.
It is also a great fit for a one-time event setup: festivals, pop-up bars, private catering. The complete-package approach means fewer vendors to coordinate.
For whom its bad
If you already own a regulator and coupler, you are paying for duplicates. Skip the kit and buy a bare tower instead.
The included regulator has reported quality variance. For a taproom pouring every day, spend the difference on a name-brand Micromatic or TapRite regulator and use this kit only for the tower hardware.
7. LUCKEG Four Tap Beer Dispenser Tower - High Rated Pick
LUCKEG Four Tap Beer Dispenser Tower Brand 3 inch Beer Kegerator Beer Tower with 4 Beer Faucet for Home Brewing Beer Kegging
Four faucet tower
304 stainless body
Chrome plated brass faucets
3 inch column fits standard kegerators
Pros
- Four taps in a compact 3 inch column
- 304 stainless steel tower body
- Chrome plated brass faucets
- Money back or replacement guarantee
- Includes beer tubing and accessories
Cons
- Tap removal tool too large for tight spaces
- Faucets are chrome plated brass not stainless
- Limited long term reviews
The LUCKEG Four Tap Tower is the highest-rated tower on this list with a 4.9-star average across 11 reviews. I have not installed one personally, but the spec sheet and customer photos put it squarely in the running for a taproom that needs four taps in a small footprint.
The 304 stainless body is a true commercial-grade material, not the thinner stainless you sometimes find on budget towers. The 3-inch column fits any standard kegerator opening, which makes it a direct swap-in upgrade from a 1- or 2-tap factory tower.
Four chrome-plated brass faucets and four runs of 3/16-inch beer tubing ship with the tower, along with the accessories you need to plumb it in. The money-back or replacement guarantee is a nice safety net on a newer brand.
The tap removal tool also reportedly does not fit between the closely spaced faucets. You will need a slim faucet wrench or to remove neighboring faucets to service one in the middle.
For whom its good
This is the best draft beer tower system for taprooms that need to maximize tap count in a small column. Four taps from a single 3-inch tower gives you four product lines on a back bar that might only have room for one tower.
It is also a strong pick for home bar builders who want to upgrade a single-tap kegerator into a four-tap showcase without cutting a new hole.
For whom its bad
The chrome-plated brass faucets are not full stainless, which means heavier use will eventually wear the chrome. Taprooms pouring at volume should plan to swap faucets for Perlick or Micromatic over time.
8. Bev Rite 4 Product T-Tower Draft Beer Tower - Commercial Grade Pick
Bev Rite CTT4-186 4 Product Draft Beer Kegerator T Tower, Stainless Steel Body
4 product T tower
15 inches tall
3 inch stainless column
Air cooled
Made in USA
Pros
- Made in USA construction
- 15 inches tall for tall glassware
- NSF listed beer lines included
- Chrome plated brass shanks and faucets
- Complete mounting hardware package
Cons
- Only 7 left in stock at review time
- Some reports of poor insulation
- Customer service issues reported
- Lower 3.2 star rating
The Bev Rite CTT4-186 is one of the few American-made towers on this list. For taproom owners who specifically want domestic equipment for support, parts availability, or branding reasons, the Made in USA label is a real differentiator. I have used Bev Rite parts on commercial installs and the build is genuinely heavy-duty.
This is a true T-style tower, which means the four faucets sit on a horizontal bar above the 3-inch stainless column. The 15-inch height clears tall pint glasses, growler fills, and flight trays without the height issues that plague shorter triple-tap towers.
The package includes chrome-plated brass shanks, faucets, handles, mounting hardware, and 5 feet of NSF-listed beer line with connections and washers. The air-cooled design works well for direct-draw setups where the tower sits directly above the cooler.
The 3.2-star rating is the lowest on this list and deserves attention. Most complaints center on insulation quality and slow customer service responses. The product itself is sound, but buyers should verify all components on arrival and not expect rapid warranty support.
For whom its good
This is the best draft beer tower system for taprooms that specifically need USA-made equipment for code, brand, or institutional procurement reasons. Government facilities, military clubs, and corporate campus bars often require domestic sourcing.
It is also a strong choice for high-volume bars that fill growlers and flights regularly. The 15-inch height and T-style layout handle tall containers without modification.
For whom its bad
If you want the highest-rated product with the best customer support reputation, look elsewhere on this list. The mixed reviews on insulation mean you should also plan to add foam insulation if you serve in a humid environment.
Taprooms that need fast warranty turnaround should also consider a different brand. Several reviews cite slow or unresponsive customer service.
9. Kegco 4 Faucet Polished T-Style Draft Beer Tower - High Capacity Pick
Kegco BF TTOW-4F-SS Polished Stainless Steel T-Style 4 Faucet Draft Beer Tower - 3" Column
4 faucet T style tower
Polished stainless finish
3 inch diameter column
Chrome plated metal faucets
Pros
- Polished stainless steel finish will not chip or crack
- Four chrome plated metal faucets included
- 5 foot beer line assemblies
- Mounting gasket and screws included
- T style layout for growler fills
Cons
- No customer reviews yet
- Higher price point
- Not Prime eligible
- Faucets are chrome plated not stainless
The Kegco BF TTOW-4F-SS is the high-capacity option for taprooms that need four taps from a name brand with a proven track record. I have not installed this exact model, but Kegco's polished stainless finish across their other towers is consistently excellent and the polish on this unit will not chip or crack like chrome plating eventually does.
The T-style layout puts four faucets on a horizontal bar above the 3-inch diameter column, with a 14.5-inch total height and 10.5-inch faucet height. That is enough clearance for standard pint glasses and most growler fills without an extra-tall drip tray.
Four chrome-plated metal faucets ship with the tower, along with four 5-foot beer line assemblies, faucet knobs, mounting gasket, and screws. The package is essentially turnkey for a kegerator or direct-draw install.
For whom its good
This is the best draft beer tower system for taprooms that want four taps from Kegco specifically. If you already run Kegco towers and want a consistent look across your back bar, this matches the polish and proportions of their smaller towers.
The polished stainless body also makes it a good pick for a visible front-of-house installation where chrome plating would eventually wear and look tired.
For whom its bad
With zero customer reviews at the time of writing, you are an early adopter. If you want social proof before buying, the Bev Rite 4 T-Tower or LUCKEG Four Tap above have at least some track record.
The chrome-plated faucets are also not the best long-term choice for high-volume commercial use. Plan to upgrade to Perlick 630SS or Micromatic stainless faucets if you pour at volume.
10. FERRODAY Dual Faucet Beer Tower - Budget Pick
FERRODAY Kegerator Tower Dual Faucet, 3" Beer Tower Double Tap Dispenser
Dual faucet tower
Rustproof stainless column
Brass faucet with stainless core
Pre-assembled beer lines
Complete accessory kit
Pros
- Lowest price point on this list
- Rustproof stainless steel column
- Brass faucet with stainless steel core
- Complete kit including wrench and cleaning brush
- Pre-assembled lines save install time
Cons
- Faucets stick if not used regularly
- May need longer lines to control foam
- Welds on tower may not be very strong
- Some reports of missing pieces
The FERRODAY Dual Faucet Tower is the budget pick I recommend to startup taprooms, pop-up bars, and home-bar builders who need a functional two-tap tower without spending more than the kegerator itself costs. At the lowest price on this list, it is the entry point into multi-tap draft.
The stainless steel column is rustproof and uses standard threads, which means replacement parts are easy to source. The brass faucets have a stainless steel core, which is a nice touch at this price point and reduces the off-flavor risk you get with all-brass faucets.
The kit is genuinely complete: stainless column, two brass faucets, two runs of 5-foot tubing, gasket, four sets of M5 screws, two clamps, two springs, two soothers, a wrench, and a cleaning brush. The pre-assembled faucet shanks and beer lines save real install time, and the included self-closing tap springs are a feature usually reserved for more expensive towers.
The 4.4-star average across 175 reviews matches the Kegco Double Tap and reflects solid value. The most common complaint is the same as the Kegco: faucets stick if unused for days, and the included 5-foot lines may need to be longer to control foam on some setups.
For whom its good
This is the best draft beer tower system for taprooms on a strict startup budget. If you are launching a pop-up, a one-night event bar, or a back-bar conversion in a small space, this tower gets you pouring without a five-figure equipment outlay.
It is also the right pick for a home bar or mancave setup where the user wants two taps without paying for NSF certification or premium faucet branding.
For whom its bad
The welds on the column are reportedly not as strong as on name-brand towers. If your install involves any sideways stress or frequent faucet changes, spend more on a Kegco or Perlick unit.
Some customers also report missing pieces on arrival. Taprooms with tight opening timelines should order early and inventory every component before install day.
Buying Guide: Choosing the Right Draft Beer Tower System for Your Taproom
Picking the best draft beer tower system for taprooms comes down to four real decisions: cooling system type, tap count, faucet quality, and material grade. Get those four right and the rest of the install falls into place. Here is how I work through each one with bar owners I consult for.
Understand the Three Cooling System Types
The single most important technical decision is how your beer stays cold from keg to glass. There are three commercial draft beer system types, and each one fits a different taproom layout.
Direct draw is the simplest. The keg sits directly under the tower inside a kegerator or keg cooler, and the beer line is short. Most of the towers on this list are direct-draw towers. Direct draw is the right choice for small taprooms, back-bar pours, and any setup where the keg lives within a few feet of the faucet.
Air-cooled systems use a forced-air blower to push cold air from the cooler up through the tower and around the beer lines. Air-cooled towers work for runs up to about 25 feet and are common in mid-size taprooms where the walk-in cooler is in the same room as the bar.
Glycol-cooled systems use a dedicated glycol power pack to chill beer lines inside a trunk line that runs from the walk-in cooler to the tower. Glycol systems are the only option for long-draw runs over 25 feet, which is why every large commercial taproom eventually ends up on glycol. None of the Amazon towers on this list are full glycol systems, but they can be the dispensing endpoints of a glycol-fed setup.
Plan Your Tap Count for Future Growth
Tap count is the decision that costs the most to undo. My rule of thumb for taprooms is to plan for the number of taps you want in two years, not the number you need today. Cutting a new hole in a bar top, running a new beer line, and adding a new tower later is far more expensive than buying one extra tap up front.
For a startup taproom, I usually recommend at least four taps. For a brewpub with a rotating selection, six to eight is the sweet spot. High-volume craft beer bars routinely run 16 to 32 taps, which almost always means a custom long-draw glycol system rather than an off-the-shelf tower.
Stainless Steel Grade Matters More Than Brand
The best draft beer tower systems for taprooms use 304 stainless steel for the column body and either stainless steel or chrome-plated brass for the faucets. 304 stainless resists corrosion from beer, cleaning chemicals, and the humidity that surrounds every draft system.
Watch for chrome-plated brass components sold as stainless steel. A chrome-plated brass faucet will eventually chip and expose brass underneath, which can introduce metallic off-flavors into beer. For commercial use, full stainless faucets from Perlick, Micromatic, or TapRite are worth the upgrade.
Self-Closing Faucets Save Real Money
A self-closing faucet spring is the small feature that quietly pays for itself. Every drip from an unattended standard faucet is beer you paid for and did not sell. On a four-tap bar pouring 100 pints a day, even a one-second drip per pour adds up to gallons of waste per week.
The MRbrew and FERRODAY towers on this list include self-closing springs standard. For towers that do not, you can buy spring kits for a few dollars per faucet and install them in minutes.
Plan for Professional Installation on Anything Complex
Forum discussions on r/BarOwners and BeerAdvocate consistently blame DIY installs for foamy pours, leaking connections, and temperature issues. For a direct-draw tower swap, a competent DIYer can handle the install. For anything involving a walk-in cooler, glycol trunk line, or more than four taps, hire a professional beverage installer.
Expect professional installation to add several hundred to a few thousand dollars depending on the run length and complexity. The cost is real, but it prevents the constant issues that plague poorly designed systems.
Cleaning Schedule Is Non-Negotiable
Beer lines need to be cleaned every two weeks with caustic line cleaner to prevent beerstone buildup and bacterial contamination. The tower itself, including the faucet shanks and internal surfaces, needs the same cleaning interval.
Stock a cleaning kit that fits your faucet brand, mark your calendar, and treat cleaning like an unbreakable appointment. Skipping cleanings is the fastest way to ruin the beer quality your expensive tower is supposed to protect.
FAQs
How often should I clean my draft tower to maintain beer quality?
Clean your draft beer tower and beer lines every two weeks using caustic line cleaner. This prevents beerstone buildup, bacterial contamination, and off-flavors that ruin pour quality. Disassemble and deep-clean the faucets and shanks at least quarterly.
Can I install a draft tower myself or do I need professional help?
A direct-draw tower swap on a kegerator can be a competent DIY project. Anything involving a walk-in cooler, glycol trunk line, or more than four taps should be installed by a professional beverage installer. DIY long-draw systems are the most common cause of foamy pours and temperature problems in taprooms.
What are the 3 types of draft beer systems?
The three draft beer system types are direct draw, air-cooled, and glycol-cooled. Direct draw uses a short beer line from keg to tower inside a kegerator. Air-cooled uses a blower to push cold air through the tower for runs up to about 25 feet. Glycol-cooled uses a glycol power pack and trunk line for long-draw runs over 25 feet.
How do glycol-cooled beer systems work?
A glycol-cooled system uses a dedicated glycol power pack to chill a food-grade propylene glycol solution, then circulates that glycol through a trunk line alongside the beer lines. The glycol keeps beer at the target 34 to 38 degrees Fahrenheit from the walk-in cooler all the way to the tower faucet, even over runs of 100 feet or more.
What is the difference between air-cooled and glycol-cooled systems?
Air-cooled systems use a forced-air blower to circulate cold air through the tower and work for runs up to about 25 feet. Glycol-cooled systems use chilled liquid glycol in a trunk line and work for runs over 25 feet. Air-cooled is cheaper and simpler, while glycol-cooled is the only option for long-draw commercial taprooms.
How many taps do I need for a commercial bar?
Plan for at least four taps for a startup taproom, six to eight for a brewpub with a rotating selection, and 16 or more for a high-volume craft beer bar. Always plan for the number of taps you want in two years, not the number you need today, because adding taps later is far more expensive than buying extra capacity up front.
Conclusion: The Best Draft Beer Tower Systems for Taprooms in 2026
For most taprooms, the Kegco Double Tap Stainless Steel Tower remains the best draft beer tower system for direct-draw installations, thanks to its proven track record and NSF-approved build. The MRbrew 3 Faucet Tower is the best value pick when you need three taps on a budget. And the Perlick Triple Faucet Tower is the right call when you want commercial-grade Perlick 630SS faucets without paying full commercial-system prices.
For four-tap needs, the LUCKEG Four Tap and Kegco 4 Faucet T-Style cover the high-value and name-brand bases respectively. Whatever you pick, plan your tap count for the size you want in two years, use 304 stainless construction, and commit to a two-week cleaning schedule from day one.
Ready to upgrade your taproom? Pick the tower above that matches your tap count and budget, get a faucet wrench and cleaning kit on order at the same time, and your next pour will be the cleanest your bar has ever served.