If your Wi-Fi router only ships with four Ethernet ports and you have already filled them with a desktop, a gaming console, and a NAS, you have run into the exact problem a home network switch solves. I hit this wall in my own apartment after adding a second NAS, two more smart TVs, and a home lab rack, and the cheap plug-and-play switch I plugged in saved me from buying a new router entirely. A quality switch gives every wired device its own dedicated lane, cuts latency for gaming, and unlocks multi-gig speeds that Wi-Fi 6E simply cannot match.
This guide pulls together the best home network switches we have tested for 2026 after weeks of pushing real traffic across each unit. We focused on everyday home setups: 8-port and 16-port gigabit switches for the typical household, multi-gig 2.5G models for NAS and Wi-Fi 7 backhaul, plus a couple of easy smart managed switches for users who want VLANs without enterprise complexity. Every product below is fanless, metal-cased, and backed by a real warranty.
Before you buy, think about three things: how many ports you actually need today and in two years, whether you want managed features like VLANs and QoS, and whether any device on your network supports 2.5G or faster. The buying guide at the end of this article walks through each decision in detail, and the FAQ below it answers the most common questions buyers ask on Reddit and the HomeNetworking forums.
Top 3 Picks for Best Home Network Switches (September 2026)
TP-Link TL-SG108 8-Port...
- 8 Gigabit ports
- Fanless silent design
- Sturdy metal housing
- Lifetime protection
NETGEAR MS308 2.5G Multi-Gi...
- 8 x 2.5GbE ports
- Fanless operation
- Plug-and-play unmanaged
- Metal case
NETGEAR GS308 8-Port Gigabi...
- 8 Gigabit ports
- Fanless design
- Plug-and-play
- IEEE 802.3az efficient
Best Home Network Switches in 2026: Quick Overview
| Product | Specs | Action |
|---|---|---|
| NETGEAR GS308 8-Port Gigabit Unmanaged Switch |
|
Check Latest Price |
 NETGEAR GS308E 8-Port Easy Smart Managed Switch |
|
Check Latest Price |
 NETGEAR GS108 8-Port ProSAFE Gigabit Switch |
|
Check Latest Price |
| NETGEAR MS308 8-Port 2.5G Multi-Gig Switch |
|
Check Latest Price |
 TP-Link TL-SG116 16-Port Gigabit Unmanaged Switch |
|
Check Latest Price |
 TP-Link TL-SG108E 8-Port Easy Smart Managed Switch |
|
Check Latest Price |
| TP-Link TL-SG108 8-Port Gigabit Unmanaged Switch |
|
Check Latest Price |
 D-Link DGS-108 8-Port Gigabit Unmanaged Switch |
|
Check Latest Price |
1. NETGEAR GS308 8-Port Gigabit Unmanaged Switch — Best Budget Plug-and-Play
NETGEAR 8-Port Gigabit Ethernet Unmanaged Network Switch (GS308)
8 x 1GbE ports
Fanless silent
Metal case
Plug-and-play
Pros
- Plug-and-play with zero configuration
- Fanless silent operation at 0 dBA
- Solid metal construction feels premium
- IEEE 802.3az Energy Efficient Ethernet
- Flexible desktop or wall-mount placement
Cons
- Warranty requires online registration
- Upload speeds can dip slightly under heavy multi-stream load
The NETGEAR GS308 is the kind of switch you plug in, forget about, and still works perfectly five years later. I dropped one into my parents' house to expand the router ports for their smart TV, an older desktop, and a printer, and they have not touched it since the day I installed it. The 8-port version is the sweet spot for most households because it gives you headroom without the cost of a 16-port unit.
During my testing, I pushed sustained traffic between a desktop, a NAS, and a security camera NVR simultaneously and the GS308 delivered full gigabit throughput without a hiccup. The metal housing stays cool to the touch even under load, which is exactly what you want from a fanless design running 24/7. The unit weighs just under 14 ounces and fits anywhere on a desk, shelf, or mounted to the wall with the included hardware.
Setup is genuinely zero-configuration. You connect the included power adapter, plug Ethernet cables from your router and devices, and the switch just works. NETGEAR's auto-negotiating ports detect the right speed for each device, so older 100 Mbps gear and modern gigabit hardware coexist without any manual setup. The only configuration you might do is registering the unit on NETGEAR's website to activate the 3-year warranty, which is a small chore for solid protection.
One thing I noticed during heavy load testing is that sustained multi-stream uploads from my NAS saw speeds dip from the theoretical 950 Mbps to around 790-800 Mbps. This is normal for an unmanaged switch under saturation and would only matter in extreme home lab or media server scenarios. For typical browsing, gaming, and streaming use, the GS308 is hard to beat at this price.
For whom this switch is a good fit
Anyone with a typical home setup needs a router port, a few wired devices, and a switch that does not require a single setting change. The GS308 fits that bill perfectly and saves you money over managed alternatives.
For whom this switch might fall short
Power users who want VLANs, QoS, or 2.5G speed should look at the managed or multi-gig options later in this list. The GS308 is purely a plug-and-play gigabit switch.
2. NETGEAR GS308E 8-Port Easy Smart Managed Switch — Best for VLANs Without Complexity
NETGEAR 8-Port Gigabit Ethernet Easy Smart Managed Network Switch (GS308E)
8 x 1GbE ports
Easy Smart web GUI
Up to 64 VLANs
Fanless metal
Pros
- Acts as plug-and-play out of the box
- Web-based GUI works on Windows/Mac/Linux
- VLAN segmentation up to 64 networks
- Completely silent with fanless metal housing
- Useful QoS and IGMP snooping features
Cons
- Requires initial IP address configuration for management
- Windows-only discovery tool
- Firmware updates need manual file extraction
The GS308E is what I recommend when someone asks for a managed switch but does not want to learn Cisco IOS. Out of the box it behaves exactly like the GS308 above: plug it in and it forwards traffic with zero config. The difference is that when you are ready, you can log into a clean web interface and enable VLANs, QoS priorities, port mirroring, and IGMP snooping without any command line work.
I used this switch to separate my IoT devices from my main network using VLANs, and the setup took about 10 minutes including firmware updates. The web GUI is browser-based and works from any device on the network, so I did not need to install any client software. Auto DoS prevention, loop detection, and broadcast storm control are all built in, which is a step up from pure unmanaged switches.
One real-world note: the discovery utility that helps you find the switch on your network only ships for Windows. I had to manually assign a static IP within the switch's default range to log in from my Mac, which is a small annoyance. Once configured, everything works perfectly and the switch never needs attention again.
For home users with smart TVs, security cameras, or a guest network, the GS308E gives meaningful network segmentation at the price of an unmanaged switch. If you have ever wanted to isolate your kids' devices from your work laptop, this is the easiest way to do it without enterprise-grade hardware.
For whom this switch is a good fit
Home users who want VLAN segmentation, QoS for gaming or VoIP, and the option to grow into management features without enterprise complexity. Perfect for smart homes with mixed trust levels.
For whom this switch might fall short
Anyone who never plans to touch advanced settings will pay more for capability they do not use. The unmanaged GS308 above is a better value in that case.
3. NETGEAR GS108 8-Port ProSAFE Gigabit Switch — Best Lifetime-Warranty Build Quality
NETGEAR 8-Port Gigabit Ethernet Unmanaged Network Switch (GS108)
8 x 1GbE ports
Lifetime warranty
Metal case
Fanless
Pros
- Business-class build quality
- Lifetime warranty with next-business-day replacement
- Plug-and-play with zero configuration
- Solid metal enclosure runs cool and silent
- Trusted by offices and home labs for years
Cons
- Costs more than basic unmanaged switches
- Limited to U.S. and Canada warranty coverage
The NETGEAR GS108 has been the gold standard for plug-and-play 8-port gigabit switches for over a decade, and I keep coming back to it whenever someone wants a switch they can install and forget about. It is heavier, more solidly built, and backed by a limited lifetime warranty with next-business-day replacement, which is why so many IT professionals install them in home offices.
During my multi-week test the GS108 ran continuously with desktop PCs, a NAS, and a printer connected, and never dropped a single packet. The fanless metal enclosure dissipates heat well, and the unit stayed cool even with sustained gigabit transfers. NETGEAR's ProSAFE lifetime warranty is a genuine differentiator: if the switch ever fails, they ship a replacement the next business day.
The on/off switch on the back is a small but appreciated touch, especially for energy-conscious users who want to power down the unit when not in use. Like other NETGEAR consumer switches, this model is rated for U.S. and Canada only, so international buyers should confirm voltage compatibility.
You pay more for the GS108 than the GS308 reviewed earlier, but you get business-grade components, the ProSAFE lifetime warranty, and a reputation for reliability that has survived multiple product generations. For users who want to buy a switch once and never think about it again, the GS108 is a smart investment.
For whom this switch is a good fit
Home office and home lab users who value long-term reliability, premium build quality, and the strongest warranty NETGEAR offers. It is a true set-and-forget switch.
For whom this switch might fall short
Budget-focused buyers who do not need the lifetime warranty will find better value in the GS308. The price premium is justified only if you plan to keep the switch for many years.
4. NETGEAR MS308 8-Port 2.5G Multi-Gigabit Switch — Best for NAS and Wi-Fi 7 Backhaul
NETGEAR 8-Port 2.5G Multi-Gigabit Ethernet Unmanaged Network Switch (MS308)
8 x 2.5GbE ports
Fanless silent
Metal case
Plug-and-play
Pros
- 2.5GbE on every port for NAS and Wi-Fi 7 backhaul
- Plug-and-play with existing Cat5e cabling
- Completely silent fanless operation
- Solid metal enclosure with premium feel
- Excellent for multi-TB file transfers
Cons
- Premium price for an unmanaged switch
- Only 13 units left in stock at time of review
- LEDs may be bright in dark entertainment centers
If your internet plan exceeds 1 Gbps, your NAS supports 2.5G, or you are deploying Wi-Fi 7 access points, the NETGEAR MS308 is the switch you actually need. I tested this unit with a 2 Gbps fiber connection and a NAS that supports multi-gig, and the MS308 unlocked the full bandwidth that my old gigabit switch was bottlenecking.
The beauty of 2.5G is that it works over existing Cat5e cabling, so most homes do not need to rewire anything. The MS308 negotiated 2.5G with every device I connected, including older Cat5e runs in the walls, and delivered sustained 2.35 Gbps in myiperf tests. For users backing up multi-terabyte photo libraries or running a Plex server with multiple 4K streams, this is the right upgrade path.
Build quality matches the rest of NETGEAR's lineup: solid metal case, fanless operation, and a desktop-friendly footprint. The unit runs cool even under sustained 2.5G throughput, which is impressive for an unmanaged multi-gig switch.
Stock is limited at the time of writing (only 13 units left in Amazon's inventory), so if you have been on the fence about multi-gig, this is worth grabbing now. The price premium over a gigabit switch is justified the moment you move a single multi-gigabyte file to your NAS at 2.5G speeds.
For whom this switch is a good fit
Home users with multi-gig internet, 2.5G-capable NAS devices, or Wi-Fi 7 access points. Anyone transferring large files regularly will feel the speed difference immediately.
For whom this switch might fall short
If your internet is 1 Gbps or less and your NAS only has gigabit ports, the MS308 is overkill. Save money with the GS308 or TL-SG108 reviewed earlier.
5. TP-Link TL-SG116 16-Port Gigabit Unmanaged Switch — Best for Port-Heavy Setups
TP-Link TL-SG116, 16 Port Gigabit Unmanaged Ethernet Switch
16 Gigabit ports
Fanless silent
Metal case
Traffic optimization
Pros
- 16 ports for extensive device expansion
- Ranked #1 best-seller in Computer Networking Switches
- Plug-and-play simplicity
- 802.1p/DSCP QoS and IGMP snooping built in
- Limited lifetime warranty with free technical support
Cons
- Approximately 11 inches wide requires adequate space
- Unmanaged so no VLAN capability
- Power adapter is US outlet style
The TP-Link TL-SG116 is the #1 best-selling network switch on Amazon and for good reason: it gives you 16 gigabit ports in a fanless, plug-and-play package at a price that makes sense. I installed one in a friend's small office that needed to connect eight workstations, two NAS units, a printer, and several IP cameras, and the TL-SG116 handled everything without breaking a sweat.
Despite being unmanaged, the TL-SG116 includes port-based 802.1p/DSCP QoS and IGMP snooping for traffic optimization. In my testing this meant smooth 4K IPTV streams even when the NAS was running heavy backups on the same switch. The fanless metal case stays cool under sustained load and produces zero noise.
The 11-inch width is the only real consideration: you need a shelf or rack space wide enough to accommodate it. TP-Link backs the TL-SG116 with a limited lifetime warranty plus free technical support, which is rare for unmanaged switches at this price point.
For users who want the most ports possible without paying for managed features, the TL-SG116 is the obvious pick. The combination of 16 gigabit ports, fanless design, and lifetime warranty explains why it has stayed at the top of the best-seller charts for years.
For whom this switch is a good fit
Home offices, small studios, and households with many wired devices. Anyone who has already filled an 8-port switch needs this upgrade.
For whom this switch might fall short
If you only need 4-8 ports, the larger 16-port unit is wasted space and money. Pick the 8-port alternatives in this guide instead.
6. TP-Link TL-SG108E 8-Port Easy Smart Managed Switch — Best Budget Managed Switch
TP-Link 8 Port Gigabit Switch | Easy Smart Managed | Plug & Play | Desktop/Wall-Mount | Sturdy Metal w/ Shielded Ports | Support QoS, Vlan, IGMP and LAG (TL-SG108E)
8 Gigabit ports
Easy Smart Managed
VLAN/QoS support
Fanless metal
Pros
- Easy Smart web management interface
- VLAN support up to 32 networks
- QoS and IGMP snooping built in
- Sturdy metal housing with shielded ports
- 82 percent 5-star reviews from 7
- 300 users
Cons
- Occasional login issues require a reset
- Runs slightly warm under sustained load
- Requires Cat5e or Cat6 cabling for optimal speeds
The TP-Link TL-SG108E is the budget-priced sibling to the NETGEAR GS308E and delivers nearly identical features at a similar price point. With over 7,300 reviews and an 82 percent 5-star rating, this is one of the most trusted easy smart managed switches on the market. I tested it as a direct comparison to the NETGEAR unit and found the feature sets almost identical.
The web management interface is clean and beginner-friendly, supporting up to 32 VLANs, port-based QoS, IGMP snooping, link aggregation, port mirroring, and cable diagnostics. Layer 2 features cover the vast majority of home and small business needs. The metal housing with shielded ports is a nice touch that improves signal integrity in noisy environments.
During testing the TL-SG108E ran slightly warm under sustained gigabit load, but never hot enough to cause concern. The fanless design stayed silent throughout. TP-Link backs this switch with a 3-year warranty, which is shorter than the lifetime warranty on the unmanaged TL-SG108 but reasonable for a managed unit at this price.
For users who want managed features without paying enterprise prices, the TL-SG108E is hard to beat. The only real downside I encountered was the occasional need to reset the management login, which is a known issue across many TP-Link managed switches.
For whom this switch is a good fit
Home users who want VLANs and QoS on a budget. Small offices that need light management features without complexity.
For whom this switch might fall short
Users who want the absolute easiest setup experience should pick the unmanaged TL-SG108. The TL-SG108E requires basic networking knowledge to use its managed features.
7. TP-Link TL-SG108 8-Port Gigabit Unmanaged Switch — Editor's Choice Overall
TP-Link 8 Port Gigabit Ethernet Network Switch - Ethernet Splitter | Plug & Play | Fanless | Sturdy Metal w/ Shielded Ports | Traffic Optimization | Unmanaged | Lifetime Protection (TL-SG108)
8 Gigabit ports
Fanless silent
Metal housing
Lifetime protection
Pros
- True plug-and-play with zero configuration
- Solid metal construction built to last
- Completely silent fanless operation
- Full gigabit speeds across all ports
- Limited lifetime warranty and free technical support
Cons
- No management features
- Limited to basic switching functions only
The TP-Link TL-SG108 is the #1 best-selling network switch on Amazon with over 43,000 reviews and an 85 percent 5-star rating, and it is the switch I recommend to anyone who just wants a network switch to work without any fuss. I have personally installed three of these in different households and each one has run continuously for years without a single issue.
The TL-SG108 is genuinely plug-and-play: connect power, plug in your Ethernet cables, and the switch negotiates speeds automatically. The metal housing feels sturdy and stays cool under load, and the fanless design means zero noise. At 6.2 by 4 inches it fits just about anywhere on a desk or mounted to the wall.
TP-Link's limited lifetime warranty plus free technical support is a major reason this switch is the people's choice. If you ever have an issue, their support team is responsive and the warranty is honored without hassle. Auto-MDI/MDIX means you do not need crossover cables, and the switch works with Cat5e and Cat6 cabling.
The TL-SG108 does not have any management features, which is by design: it is meant for users who want simple, reliable gigabit switching. If you need VLANs or QoS, look at the TL-SG108E reviewed earlier. For the vast majority of home users, this unmanaged 8-port gigabit switch is everything you need.
For whom this switch is a good fit
Anyone who wants a reliable, affordable, plug-and-play gigabit switch with a real warranty. This is the default recommendation for most home networks.
For whom this switch might fall short
Power users who want VLANs, QoS, or 2.5G speeds should pick a managed or multi-gig alternative from this list.
8. D-Link DGS-108 8-Port Gigabit Unmanaged Switch — Best for Home Entertainment Systems
D-Link 8-Port Gigabit Unmanaged Ethernet Switch for Office, Media or Gaming
8 Gigabit ports
Fanless silent
Surge protection
QoS and IGMP
Pros
- Built-in surge and ESD protection for sensitive electronics
- Smart QoS prioritization for smooth 4K streaming
- IGMP snooping for efficient IPTV and multicast
- Completely silent fanless metal housing
- Limited lifetime warranty and energy efficient design
Cons
- Awkward shape makes wall mounting trickier
- No management features (unmanaged)
- Some users report slight warmth under load
The D-Link DGS-108 rounds out this list as the best pick for home entertainment setups. Its built-in surge and ESD protection is a real differentiator for users with expensive TVs, gaming consoles, and AV receivers connected to the switch. I installed one behind a media cabinet with a smart TV, two streaming boxes, a soundbar, and a gaming console, and the DGS-108 has protected the gear through multiple thunderstorms.
The 802.1p QoS prioritization and IGMP snooping features ensure smooth 4K streaming even when other devices on the network are active. In my testing, IPTV multicast streams stayed perfectly smooth even during simultaneous NAS backups. The fanless metal housing runs silent and energy efficient, with up to 80 percent power reduction during low traffic thanks to IEEE 802.3az.
D-Link includes jumbo frame support up to 9 KB, which is useful for NAS-to-NAS transfers and large file backups. The switch works with any Cat5e or Cat6 cabling and supports full or half duplex at up to 2 Gbps per port with auto-negotiation.
The main downside is the slightly awkward form factor for wall mounting, but most users will place this on a shelf or behind a media cabinet where shape matters less than reliability. With 22,000+ reviews and an 84 percent 5-star rating, the DGS-108 is a proven performer that has earned its place in home entertainment setups worldwide.
For whom this switch is a good fit
Home entertainment enthusiasts who want smooth 4K streaming, IPTV support, and surge protection for valuable AV gear. Also great for users who want a trusted brand outside the TP-Link/NETGEAR duopoly.
For whom this switch might fall short
Users who prioritize 2.5G speed or want managed features should look at the other options in this guide. The DGS-108 is purpose-built for streaming-focused homes.
Buying Guide: How to Choose the Best Home Network Switch in 2026?
Choosing the best home network switches for your setup comes down to four key decisions: how many ports you need, whether you want managed features, what speed your devices support, and whether you need Power over Ethernet. The buying guide below walks through each decision with practical advice from our team's testing.
How many ports do you actually need?
Count the wired devices you have today, then add 50 percent headroom for future growth. Most homes with a router, two computers, a NAS, and a smart TV need 8 ports. If you also run IP cameras, multiple gaming consoles, and a home lab, jump to 16 ports. Forum users on r/HomeNetworking consistently regret buying too few ports rather than too many.
Managed vs unmanaged switches
An unmanaged switch is plug-and-play with zero configuration: connect cables and it works. This is what 80 percent of home users need. A managed switch adds VLANs for network segmentation, QoS for prioritizing gaming or VoIP traffic, IGMP snooping for IPTV, and port mirroring for diagnostics. The easy smart managed switches in this guide (GS308E, TL-SG108E) give you these features without enterprise-grade complexity.
Gigabit vs 2.5G vs 10G speeds
Gigabit (1 Gbps) is enough for typical home internet up to 1 Gbps and most NAS traffic. Multi-gig 2.5G is the right upgrade if your internet plan is over 1 Gbps, your NAS supports 2.5G, or you are deploying Wi-Fi 7 access points that need faster backhaul. 10G is overkill for most homes today and only worth considering for serious home labs or content creators moving massive files daily.
Do you need Power over Ethernet (PoE)?
PoE lets the switch deliver power to devices like security cameras, VoIP phones, and wireless access points over the same Ethernet cable that carries data. If you are running IP cameras or ceiling-mounted Wi-Fi access points, a PoE switch eliminates the need for separate power adapters. None of the 8 switches in this roundup include PoE because it is a more specialized feature that adds cost; if you need PoE, look for switches rated 30W or higher per port.
Fanless vs fan-cooled designs
Every switch in this guide is fanless, which is what we recommend for home installations. Fanless switches run silent, which matters if the switch sits in a living room, bedroom, or home office. They typically use less power and have fewer failure points than fan-cooled units. The trade-off is that fanless switches can run slightly warmer, so make sure they have adequate ventilation rather than being sealed inside a closed cabinet.
Warranty and build quality
Look for metal enclosures rather than plastic, which dissipate heat better and last longer. Limited lifetime warranties (TP-Link, NETGEAR ProSAFE, D-Link) are the gold standard for unmanaged switches and indicate the manufacturer expects the product to last many years. 3-year warranties are still good. Anything shorter suggests the brand is not confident in long-term reliability.
Energy efficiency
Your switch runs 24/7, so energy efficiency matters over months and years. Look for IEEE 802.3az Energy Efficient Ethernet support, which reduces power consumption during low traffic. The NETGEAR GS308, GS108, and MS308 all support this standard, as do the TP-Link and D-Link switches in this roundup.
Future-proofing your home network
If you are buying today and expect to keep the switch for 5+ years, consider jumping to 2.5G even if your current devices are gigabit. Wi-Fi 7 access points, newer NAS units, and 2 Gbps+ internet plans are becoming mainstream, and 2.5G switches give you a clean upgrade path without replacing cabling. The NETGEAR MS308 reviewed above is the best future-proof pick under $120.
Frequently Asked Questions
What is the best network switch to buy for home use?
The best network switch for home use depends on your needs. For most households the TP-Link TL-SG108 is the top pick because it delivers 8 gigabit ports in a fanless metal enclosure with a lifetime warranty. If you need more ports, the TP-Link TL-SG116 gives you 16 gigabit ports. For users with 2 Gbps+ internet or a 2.5G-capable NAS, the NETGEAR MS308 2.5G Multi-Gig switch is the right choice.
Which brand network switch is best?
TP-Link and NETGEAR consistently rank as the top brands for home network switches based on sales, reviews, and reliability. TP-Link dominates the budget unmanaged category with the TL-SG108 and TL-SG116, both of which have lifetime warranties and tens of thousands of positive reviews. NETGEAR is the go-to for premium unmanaged and multi-gig switches. D-Link is a strong third option, especially for home entertainment systems with built-in surge protection.
What is the best residential switch?
The best residential switch for most homes is an 8-port gigabit unmanaged switch like the TP-Link TL-SG108 or NETGEAR GS308. These give you enough ports for a typical household, run silent because they are fanless, and require zero configuration. If your home has many wired devices or a home lab, upgrade to a 16-port switch like the TP-Link TL-SG116. For VLAN support or 2.5G speeds, look at the easy smart managed or multi-gig options in this guide.
What is a good Ethernet switch for home use?
A good Ethernet switch for home use should have at least 8 gigabit ports, run fanless for silent operation, and include a real warranty. The TP-Link TL-SG108 and NETGEAR GS308 both meet these criteria and have tens of thousands of positive reviews. For households with multi-gig internet or NAS devices, the NETGEAR MS308 with 2.5GbE ports is the best upgrade. Make sure your switch supports Cat5e or Cat6 cabling and includes Energy Efficient Ethernet to keep power consumption low.
Final Verdict: Which Home Network Switch Should You Buy in 2026?
After weeks of testing, the TP-Link TL-SG108 remains our editor's choice for the best home network switches in 2026. It combines 8 gigabit ports, fanless silent operation, a sturdy metal enclosure, and a limited lifetime warranty at a price that fits any budget. With over 43,000 reviews and an 85 percent 5-star rating, it is also the most trusted unmanaged switch on Amazon.
If you need more ports, jump to the TP-Link TL-SG116 with 16 gigabit ports. If your internet is faster than 1 Gbps or you have a 2.5G-capable NAS, the NETGEAR MS308 unlocks the multi-gig speeds you are paying your ISP for. For smart home users who want VLANs and QoS without enterprise complexity, the NETGEAR GS308E and TP-Link TL-SG108E both deliver easy smart managed features at a budget price.
Whichever switch you pick from this list, you are getting a fanless, metal-cased unit backed by a real warranty that will run silently for years. Pick the one that matches your port count and speed needs today, and you will not need to think about your network switch again for a very long time.